Floor Lamp Shade Frames

and frames for Large Table Lamps

Prices shown are for the frame only - finished shade not included.

Lampshade Frame Price List

Click on pictures to enlarge

Click on pictures to enlarge

Frames shown below have Reflector Fitter Wire to fit 8" or 10" reflector bowl to fit traditional candelabra style floor lamp (shown with 10" reflector bowl)

Here is a shade with reflector fitter wires shown:

Reflector fitter wire "humps" rest over edge of bowl to hold shade in place.

Click on pictures to enlarge

Traditional

Small:  12" x 18" x 10" tall  $35

Medium:  13" x 19" x 11" tall  $37

Large:  15" top x 20" x 11" tall  $40

Linda Double Outscallop

Linda Double Outscallop   $37

(Reflector Wire for 8" or 10" bowl)

11-3/4" top, 20" bottom, 9-3/4" high

Classic

Reflector Wire fitter for 8" or 10" bowl (also available with Washer Top)

11" top, 21-1/2" bottom, 14-1/2" high

Click on link to Ready Made Shades for imported floor lamp shades for Reflector Bowl

This is a  Swing Arm Lamp  with an 8-inch reflector bowl (for information only)

A swing-arm lamp requires a shorter shade to clear the arm when you swing it out.

Reflector wire fitter shade for 8" bowl (click on pictures to enlarge)

9" top,  14" bottom, 9" tall  Frame only $26

The following frames have a Washer Top Fitter to fit standard harp.

Babette

Oval, WT, 6 ribs,  (Top 4-1/2" x 9")  Bottom (15" x 22"), 8-1/2" tall.

French cuff bottom.  Ideal for Double-Cluster 2-lite floor lamp, or large 2-lite table lamp.

Belmont

Top 3" x 13", washer flush;  bottom 13-1/2" x 25-1/2".  16 panel scallop bottom points up, 16 umbrella ribs, 8-1/2" high.  Ideal for double-cluster 2-lite floor lamp or hanging fixture.

Cloud

WT  (4" x 6") x (24" x 12") x 14"

Crown, large

4" top, washer flush, with 1" collar.    19"  8-scallop bottom, points down. 

19" octagonal cuff up 3", 11" overall height.

Curl

Oblong, WT, 8 special ribs,  4" top,  17" x 23-1/2" fancy bottom & cuff,  9" tall.   Ideal for double-cluster 2-lite floor lamp or large  2-lite table lamp.  Cameo panels great for sugar shades, or rosette embellishment.

Delight

Oblong,  WT,  3-1/2" x 5-1/2" top and attached collar;  8-scallop custom oval bottom 11" x 23", special side shape.  Special end cuffs & rib ends.  9-1/2" high.  Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

Desert

Oval, 3" round top, flush washer, 14-1/2" x 22" unevenly spaced, custom shaped bottom, 8 ribs.  6-1/2" high.  Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

Kahn

2" round top with flush washer,  19"  8-scallop point down bottom,  8 scallops point up cuff.  Cuff is about 5" at highest point, and 3" in the middle.  Overall height is 8"

Large Diamond

5" round top with flush washer,  24" bottom, 16 straight ribs,  9" tall

Emmaline

Oblong, WT,  7-1/2" x 11-1/2" fancy top,  13" x 20" custom fancy bottom, raised teardrop panels,  14" wide at widest point,  15" overall height (washer down 1-1/2")   Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

  Flapper

4" round top with flush washer,  16-1/2" diameter at bottom,  18-1/2" at widest point.  9-1/2" tall.

Garden

Click on pictures to enlarge

WT  6" round top with flush washer,  26" scallop bottom cuff, (scallops 3" point to point),  9" high

Gent

5" top, 23" bottom, 7" tall with 2" cuff 

This frame is an exact duplicate of a 1920's original.

Gullwing

Oblong, WT  5" x 8" fancy top,  14" x 24" fancy bottom, 8" high, flush washer, sides have rosette areas, 4 leaf-like panels.  Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

Josh's Diamond

Oval, 7" x 11" top, washer down 1/2",  13" x 20" diamond-style bottom. Special bottom has reversing curves and points.  9-1/2" high.  Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

  Juliet

Oval, WT,  5" x 8" top, washer flush under 1" collar.  8-scallop bottom.  18" x 25" points up,  10-1/2" high.  Sides are hearts.  Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

Juliet with Cuff

same as Juliet, with added 1-1/2" cuff at bottom.   12" high.  Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

Kenosha

based on an original antique frame

12-1/2" Round Top,  18-1/2" Square cut-corner bottom, 12" high (not including fringe)

Square, with 6"wide inverted cut corners, bottom straight gallery sections 10" wide 

Kristine

Click on pictures to enlarge

Oval, WT fitter down 1",  4-1/2" x 7" top, stretched-scallop, points down.  Bottom is 15" x 21", custom 8-panel oval points down, 12" high, inverted hearts.  Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

Possibilities for covering this frame are endless! 

Le Elegance

for single bulb or double-cluster floor lamp.

Washer-top frame:   Round Top 7-1/2", Square shaped bottom 19", 12-1/2" tall not counting fringe

Merry Go Round

3" round top with flush washer.  24" special provincial bottom.  16 scallop cuff ring,  8 panels,  12-1/2" high.

WT 12"x 19"x 13"  cut-corner bell shape  $31

  Mystic

4" round top, washer flush, 12" high,  14-1/2" x 22" Oval scallop bottom, four 4" x 5" slanted ovals on "S" style ribs.  Ideal for double-cluster 2-lite floor lamp or large 2-lite table lamp.

Octagon Bell

WT, 22" bottom, 8" tall

Octavius

WT, 3" x 17" hex bottom,  5" high

  Oval Floor Shade

17" wide top, 25" wide bottom, 9" high

Pagoda II

24" diameter, 14" tall

Click on picture to enlarge

Patio

4" top with flush washer.  24" 12-scallop bottom; 14" high.  12 special ribs, 5" tall matching cuff.

Peach

3" x 5" top with attached collar, flush washer,  11" x 21-1/2"  8-panel oval scallop bottom, special side panel and special oval.  11" high.

Phat Phair

4" round top with flush washer,  19" Phair bottom, 6 over-bent ribs, 9" high

This frame also available in Small, Medium, and Large (see Round frames)

Rosalee

3" top, washer flush, 17" bottom,  12-1/2" high.  6 leaf panels, overall umbrella shape.

2" x (14" x 20") x 10" flush washer

2" top,  14" x 20" oval point and wave bottom,  10" high with "S" ribs on ends, side hearts, and dome style top

Ruby

WT 3" top, 24" bottom,  8" high

(This shade also comes in a Medium size for table lamps)

Sandab

2" round top with flush washer, 2" high dome part included in 12" overall height.  6 leaf-like shapes with connectors from the bottom section.  22" point-to-point across bottom.

Siri Antique

Exact replica of rare original antique frame (very pricey to duplicate!)

WT  Oval,  7" x 11" top,  13-1/2" x 21" bottom, 15" tall.  Fitter is dropped 2-1/2".  Ideal for double cluster 2-lite floor lamp.

Special Scallop

13" top, 20" bottom, 13-1/2" tall  (Washer top fitter - NOT reflector)

Scallop top and bottom, 8 sections

Trophy

Top: 9" coved corner round, washer flush, bottom 18" wide,  12" high overall.  4 custom side panels and corner panels.

 Tulip, Large

6-1/2" x 17-1/2" x 14".  Washer down 2".

Tulip, Extra Large

19" across center,  24" high,  13" diameter at bottom

washer level, down 5" from top

Whimsey

2-1/2" x 21" x 12" with flush washer.  2-1/2" top, 12" high, 21" provincial bottom with reversed matching cuff.  11" provincial ring up 9",  6 "S" ribs.

Other finished floor lamp shades shown here

Restored floor lamp shades shown here