Antique Lamp Parts, page 2

Hannah Murphy Lamps & Lampshades

Toledo, Washington

360-864-2945

Toll-free order line 1-888-640-LAMP (5267)

Click here to see some of our New Lamp Parts or back to Vintage Lamp Parts page 1

Click on pictures to enlarge to full size

Vintage Traditional 3-Candelabra, center Mogul Floor Lamp, complete with new electrical components and 10" reflector bowl. Shipped unassembled, without shade $275 plus shipping and insurance (approx. $50)

Vintage Mogul/3-Candelabra Clusters for Floor Lamps

Vintage Mogul candelabra cluster Prices ranging from $25 - $45 each

These clusters do not come pre-wired.

Some need new components such as Porcelain Mogul Socket, Candle Sockets, or Candle Covers

For details on condition of each, call and specify item number on picture.

CLICK ON PICTURES TO ENLARGE

Cluster 1 & 2 available

Cluster 4 available

Close-up of decorative arms on cluster #5

Click on pictures to enlarge to full size

click here for Other Factory-Made Reflector-fitter Floor Lamp Shades

SOLD

Vintage Banker's Lamp With Vianne Glass Shade

(Click on picture to enlarge to full size)

SOLD

Gone With the Wind style

Antique Ruby Glass Font, New Ruby Glass Dot Optic Ball shade

Antique brass finish solid brass components

$395 plus shipping and insurance (shade shipped separately)

Call for further details

Vintage double student lamp, shown with matching Vianne Glass 7" shades and chimneys

Click on pictures to enlarge

Vianne Light Pink Ribbed Cased Glass Shades

Vianne Green Ribbed Cased Glass Shades

Vianne Green Smooth Cased Glass Shades

Lamp by itself: $159.00 plus shipping & insurance

Vianne Pink Ribbed Shades $79.00 each; Complete with lamp $297.00

Vianne Green Ribbed Shades $99.00 each; Complete with lamp $325 plus shipping & insurance

Vianne Green Smooth Shades $119.00 each; Complete with lamp $369.00 plus shipping & insurance

Chimneys, if bought separately, $10.00 each plus shipping & insurance

Original Bradley & Hubbard Table Lamp

23" tall (to top of finial)

Lamp only $475

Bradley & Hubbard

Click on pictures to enlarge

B&H signature

Depression era Houze Lamp

11" tall

Antique Carmel Bakelite, as is (needs to be re-wired)

$135 plus shipping & ins.

Only one available

Click on pictures to enlarge to full size

Antique Bamboo Birdcage lamp shade, excellent condition

SOLD

Click on pictures to enlarge to full size

Ready to restore vintage floor lamp, all original pieces, including flat Onyx insert

You restore it, $175 We restore it, $375

Click on photos for larger view

Antique Round Ball and Flat Marble Breaks

$45 each

Cast Metal Cherub Column for Table Lamp (1 left in stock).

ONE INCH CRACK ON BACK AS SHOWN IN PICTURES

CAN BE REPAIRED WITH EPOXY OR JB WELD. Click on pictures to enlarge

Antique Columns & Breaks, cast metal

Left 1/4 IPS SOLD

2nd from Left 1/4 IPS $28

Right two: (goes with Cherubs above) Slips 1/8 IPS $9 each

Vintage Column, cast metal

For floor lamp 1/4 IPS pipe. 8" tall 2" diameter across top

SOLD

Click on photos for larger view

Un-catalogued Bridge Lamps to be restored

(A) & (V) Brass, Iron

(one with white twist pole is SOLD)

Click on photos for larger view

Beautiful, Ornate Swing Arm Floor Lamp, Onyx and Column (A) Cast Metal Base (to be restored and re-wired). 51-1/2" tall to top of Mogul bulb holder. Requires 8" IES opal glass bowl to use reflector-wire shade. (Shade and reflector bowl sold separately - not included in prices below.)

Has large base porcelain Mogul socket with porcelain Reducer to accept regular size base bulb. As is, shipped unassembled, $149. If we refinish and rewire it for you, cost will be $199 plus shipping and insurance (unassembled, shipped in two separate cartons). Estimated shipping & insurance cost $45.

Click picture to enlarge

Example of reflector-wire shade for Swing Arm lamp - little grooves in fitter wire rest on edge of bowl, shown below. Prices vary depending on fabrics and trims selected. Any color, like the pink one shown above with fancy trim and fringe is $189. Plain, without fancy trim and fringe, approximately $149.

6" Bowl $20.00

8" Bowl $30.00

10" Bowl $39.00

N O T I C E

UPS & POSTAL RATES INCREASED DRAMATICALLY JANUARY 1st

AVERAGE COST TO SHIP AN 8" OR A 10" BOWL IS $15.00 - $18.00

Click on photos for larger view

Antique Floor Lamp Base (A) with Original Onyx Insert, Brass

(Column above onyx is new, and not included) SOLD

   Click on photos for larger view Restorable Floor Lamp with Onyx insert in Base (V) Brass

   Click on photos for larger view Vintage Floor Lamps with all original pieices
You restore, $175 each

We restore, $375 each

Restorable Light-weight Bridge Lamp Base, Brass SOLD

Paint has now been removed
Vintage Heavy Cast Floor Lamp Base with original 5" Onyx SOLD



This old cast metal base is 11" across bottom, 3-1/2" high, with 6" seating area.

   There is a hole in the edge for the cord.   SOLD



Click on photos for larger view    SOLD
SOLD
Floor or Bridge Lamp Base (V) Cast Iron (although it rings like Bronze), Intricate leaf design,   5" inset for onyx or marble, 3" tall, 13" corner to corner, 9-1/2" side to side, shaped sides, tapped for 1/4 IP pipe, switch hole for bottom light. Can be used as is without refinishing.

SOLD
SOLD
Vintage Cast Iron Bridge Arm and Base with large threaded hole for ornate lathe-turned wood pole (still trying to remove umpteen coats of paint from wood pole. When it is stripped, we'll put a picture of it on here. After restoration, these pieces will be sold as a complete bridge lamp kit for you to assemble.

(L) (R)
Top

Under side

SOLD

Very ornate Cast Iron Bridge Arm and Base (A) (click on the pictures to enlarge for detailed view)

The Sailing Ships bridge arm and the filigree base are both in excellent condition, and will make an extraordinary bridge lamp. Top row shows each side of the unusual bridge arm.

The bridge arm and base have had many coats of paint blasted off, and now been primed.

These are circa 1920's pieces, and came off the same lamp, so they must stay together.

SOLD

(Click on pictures to enlarge)
Art Deco
3 pieces from old bridge lamp (V)   SOLD

SOLD Bridge Lamp Base (A or V)
Cast Iron, ornate lattice open work design with scroll work. "S672" stamped on bottom. Very popular in the 1920's and 1930's.   9" diameter with feet 1-3/8" protruding on each corner. Tapped for 1/4 IPS pipe. Blasted years' of paint off...ready to be refinished.   SOLD

   SOLD Click on photos for larger view Floor Lamp Base (A), Ornate, Intricate Filigree, Cast Iron, Signed: "B52 Wellington Stone; Pat. Applied For". Several old coats of paint were removed and has been primed with Boeing primer - will not rust again! Very nice piece to be finished. Tapped for 1/4 IP pipe.    SOLD

   Click on photos for larger view   SOLD Bridge Lamp Base (A, R) Cast Iron For light-weight Uno fitter or small glass shade, tapped for 1/4 IP pipe, 10-5/8" corner to corner of feet. Very nice Leaf pattern,   SOLD

   Click on photos for larger view SOLD Floor or Bridge Lamp Base (V) Heavy, nicely decorated center, tapped 1/4 IP, stamped on bottom "190", 11-1/2" 4-footed.   Cast Iron, to be refinished.
SOLD

  SOLD
Click on photos for larger view
Floor Lamp Base with Switch Hole for Bottom Light (A) Cast Iron. There is so much paint on this base it's hard to see the nice design. (Click on image to see larger picture).   Stamped on the bottom is "#845", tapped for 1/4 IP pipe, raised feet, 11-1/2" point to point (9-3/4" round), with 5" inset for marble or onyx break, switch hole for bottom light.      SOLD

    SOLD
Click on photos for larger view
Octagon Floor Lamp Base (A) Cast Iron, stamped on the bottom "Mitchell M409".    Eight raised "button feet", cord hole, and switch hole for bottom light, 5" inset for onyx or marble break, tapped for 1/4 IP pipe, heavy.    SOLD

    SOLD Click on photos for larger view Floor Lamp Base (V) Brass Four-footed, simple designed, stamped "Fairmount #312" heavy base. Tapped for 1/4 IP pipe.       SOLD

   SOLD
Click on photos for larger view
Cast Iron Floor or Bridge Lamp Base (A) 10" Round, heavily embossed, with rope design edge, cord hole, stamped "Salem Bros. NY" on bottom. Needs to be blasted and refinished.
SOLD

   Click on photos for larger view Floor Lamp Base to be Refinished (A) Brass, simple style, marked "Colonial Premier Co., Chicago, IL #953"    Tapped for 1/4 IP pipe, 10" round with six raised feet. Original sticker still on bottom.
SOLD

   SOLD
Click on photos for larger view
Bridge Lamp Base (A) Cast Iron Stamped with "E1010". 9-7/8" diameter, tapped for 1/4 IP, Four foot-pegs underneath, nice design with daisies and cross-hatch. To be restored.    SOLD

SOLD   Click on pictures to enlarge to full size

Antique Gothic Bridge Lamp - all original iron pieces. Twist pole is solid (cord must go on outside). Intricate filigree work, to be restored  (partially refinished - rust cleaned off)

SOLD

We accept credit cards directly. We also accept other credit card payments only through PayPal. Call us first to determine shipping charges.

We also accept checks and money orders. To place an order, call us toll-free, or send e-mail to:

Send e-mail to: hannah@toledotel.com

Click here to see some of our New Lamp Parts or back to Vintage Lamp Parts page 1

BACK TO HOME PAGE Hannah Murphy Lamps & Lampshades

Toll-free order line 888-640-5267

Across-The-Board Woodworks

Toledo, Washington

Click on photos for larger view	Restorable Floor Lamp with Onyx insert in Base (V) Brass
Click on photos for larger view	Vintage Floor Lamps with all original pieices You restore, $175 each We restore, $375 each
	Restorable Light-weight Bridge Lamp Base, Brass SOLD
Paint has now been removed Vintage Heavy Cast Floor Lamp Base with original 5" Onyx SOLD
This old cast metal base is 11" across bottom, 3-1/2" high, with 6" seating area. There is a hole in the edge for the cord. SOLD
Click on photos for larger view SOLD	SOLD Floor or Bridge Lamp Base (V) Cast Iron (although it rings like Bronze), Intricate leaf design, 5" inset for onyx or marble, 3" tall, 13" corner to corner, 9-1/2" side to side, shaped sides, tapped for 1/4 IP pipe, switch hole for bottom light. Can be used as is without refinishing.

SOLD	SOLD Vintage Cast Iron Bridge Arm and Base with large threaded hole for ornate lathe-turned wood pole (still trying to remove umpteen coats of paint from wood pole. When it is stripped, we'll put a picture of it on here. After restoration, these pieces will be sold as a complete bridge lamp kit for you to assemble.
(L) (R) Top Under side	SOLD Very ornate Cast Iron Bridge Arm and Base (A) (click on the pictures to enlarge for detailed view) The Sailing Ships bridge arm and the filigree base are both in excellent condition, and will make an extraordinary bridge lamp. Top row shows each side of the unusual bridge arm. The bridge arm and base have had many coats of paint blasted off, and now been primed. These are circa 1920's pieces, and came off the same lamp, so they must stay together.
SOLD (Click on pictures to enlarge)	Art Deco 3 pieces from old bridge lamp (V) SOLD
SOLD	Bridge Lamp Base (A or V) Cast Iron, ornate lattice open work design with scroll work. "S672" stamped on bottom. Very popular in the 1920's and 1930's. 9" diameter with feet 1-3/8" protruding on each corner. Tapped for 1/4 IPS pipe. Blasted years' of paint off...ready to be refinished. SOLD
SOLD Click on photos for larger view	Floor Lamp Base (A), Ornate, Intricate Filigree, Cast Iron, Signed: "B52 Wellington Stone; Pat. Applied For". Several old coats of paint were removed and has been primed with Boeing primer - will not rust again! Very nice piece to be finished. Tapped for 1/4 IP pipe. SOLD
Click on photos for larger view SOLD	Bridge Lamp Base (A, R) Cast Iron For light-weight Uno fitter or small glass shade, tapped for 1/4 IP pipe, 10-5/8" corner to corner of feet. Very nice Leaf pattern, SOLD
Click on photos for larger view SOLD	Floor or Bridge Lamp Base (V) Heavy, nicely decorated center, tapped 1/4 IP, stamped on bottom "190", 11-1/2" 4-footed. Cast Iron, to be refinished. SOLD
SOLD Click on photos for larger view	Floor Lamp Base with Switch Hole for Bottom Light (A) Cast Iron. There is so much paint on this base it's hard to see the nice design. (Click on image to see larger picture). Stamped on the bottom is "#845", tapped for 1/4 IP pipe, raised feet, 11-1/2" point to point (9-3/4" round), with 5" inset for marble or onyx break, switch hole for bottom light. SOLD
SOLD Click on photos for larger view	Octagon Floor Lamp Base (A) Cast Iron, stamped on the bottom "Mitchell M409". Eight raised "button feet", cord hole, and switch hole for bottom light, 5" inset for onyx or marble break, tapped for 1/4 IP pipe, heavy. SOLD
SOLD Click on photos for larger view	Floor Lamp Base (V) Brass Four-footed, simple designed, stamped "Fairmount #312" heavy base. Tapped for 1/4 IP pipe. SOLD
SOLD Click on photos for larger view	Cast Iron Floor or Bridge Lamp Base (A) 10" Round, heavily embossed, with rope design edge, cord hole, stamped "Salem Bros. NY" on bottom. Needs to be blasted and refinished. SOLD
Click on photos for larger view	Floor Lamp Base to be Refinished (A) Brass, simple style, marked "Colonial Premier Co., Chicago, IL #953" Tapped for 1/4 IP pipe, 10" round with six raised feet. Original sticker still on bottom. SOLD
SOLD Click on photos for larger view	Bridge Lamp Base (A) Cast Iron Stamped with "E1010". 9-7/8" diameter, tapped for 1/4 IP, Four foot-pegs underneath, nice design with daisies and cross-hatch. To be restored. SOLD
SOLD Click on pictures to enlarge to full size Antique Gothic Bridge Lamp - all original iron pieces. Twist pole is solid (cord must go on outside). Intricate filigree work, to be restored (partially refinished - rust cleaned off) SOLD