Vintage, Old, or Antique Floor Lamp & Bridge Lamp Parts, and Table Lamp Parts

Hannah Murphy Lamps & Lampshades

Toledo, WA 360-864-2945

V = Vintage A=Antique R=Restored or Refinished

also see New Lamp Parts and Antique Lamps & Parts page 2

Add shipping and insurance to prices. Unless otherwise stated, each item is sold separately - not as a complete set or complete lamp. We stock all hardware for both 1/4 IPS and 1/8 IPS lamp components. Many are shown at link to "Special Requested Lamp Parts"Call for further details. Please note: PayPal does not calculate shipping charges, so please call first.

We accept credit card payments directly. Any other credit card payment can be made through PayPal at https://www.paypal.com. Call us first to determine shipping charges.

Vintage Floor Lamp Decorative Cast Metal Column $40 Click on picture to enlarge 10-1/4" tall Slips over 1/4 IPS pipe (standard floor lamp size)
Un-wired Vintage 3-cluster Mogul assembly for candelabra floor lamp Click on picture to enlarge Cluster Assembly Includes medium base candle sockets, insulators & candle covers (bowl not included) $79.00 Vintage 10" Reflector Bowl sold separately $45.00
Vintage Brass Plated Swing Arm Floor Lamp Click on pictures to enlarge Completely refinished and re-wired, including 8" waffle pattern Opal Reflector Bowl 5" swing-arm, fully extended 10" $177.00 plus $45 shipping & insurance Fully Assembled (Glass Bowl shipped separately)
Click on picture to enlarge 4-inch Brass Swing Arm (8" when fully extended) $25.00
Vintage Jadite Bridge Lamp Click on pictures to enlarge Call for details
Old Aladdin Lamp Click on pictures to enlarge Shown in picture #1 with Fabric Shade & Chimney Shown in picture #2 with 10" fitter Opal Melon Glass Shade & Chimney
Old Floor Lamp Bases - Click on pictures to enlarge To be restored * * * * * * * * * Brass plated Iron, Already Refinished * * * * * * * * * * Top Row, Center - SOLD; Bottom Row, Right - Sold Bottom Row, Left - Sold
Old Floor Lamp Arm (click on picture to enlarge)
(click on picture to enlarge) Antique Pharmacy Shade, Opal 2-1/4" fitter $40
Very old Opal Swirl Break Call for details
Pictures below are thumbnails... click to enlarge to full size All original iron & brass parts Base has had many coats of paint removed, and one coat of primer applied to keep Iron base from rusting. Original ornate square embossed tubing (corners inverted). New socket and 12' or 16' cord furnished. $179 plus $37 shipping, unassembled, in 2 boxes Call for further details 1-888-640-LAMP (5267)
Original unique iron bridge lamp. New socket furnished. All other pieces are in wonderful shape. It came with a coat of brass colored paint which has not been disturbed. Pole threads directly into base and bottom of bridge arm. (not a separate piece of tubing.) $179 plus $37 shipping, unassembled, in 2 boxes.
8-1/4" Square Base, to be re-plated. Nice piece for Bridge Lamp Base
Vintage Copper-plated Iron Floor Lamp Base & Matching Column Base is 11" diameter (threaded for 1/4 IP pipe), 3-1/2" high. Column is 6" high. Both pieces, sold as set: $75
This sad-looking base has not been refinished yet, but underneath all the rust and old paint is a lovely piece of ornate ironwork. 11-3/4" diameter, 3" high, with 5" seating area. Has place for foot switch. When refinished it will be a dandy! $50 as is; $75 refinished
	Restored Floor Lamp base (V) $50
	Antique Floor Lamp Base, heavy Cast Brass, shaped hexagon embossed design, with new 6" Onyx insert $95 (Without Onyx $70)
	Restored Floor Lamp Base (V)
	Click on any picture to enlarge
	Pink Marble & Brass Base of Bridge Lamp (V) Complete Lamp, $179 shipped disassembled.
Click on photos for larger view	Floor Lamp Base (V) with 5" Original Onyx Insert. $65 (Without Onyx piece, $45) Column above onyx is new, and is not included
The bottom is not pretty, but just needs a piece of felt to cover it.	Large Table lamp base, or Small floor lamp base (V) 9-1/4" flat-to-flat; 10" point-to-point, 3" tall. On underneath side, metal has flaw that won't be noticeable when bottom is covered with felt. Base only - $25 Right: 11-1/2" tall Vintage Cherub column only - $30 click on pictures to enlarge
	New Die Cast Metal Reproduction of 13" Antique Bridge Arm, #M1508 antique brass finish, $35 New Top Break #11420 6-3/4" tall, Cast metal, antique brass finish, $21.00
SOLD	1" Brass Ivy Embossed Tubing 6" Onyx flat round insert $23 #10075 antique brass finish cast metal filigree Base with 6" inset, 2-1/4" high, 12-1/4" diameter, slips 1/4 IPS weight 5 pounds. $73 Complete Bridge Lamp, using New Cast Metal Base #10075 Antique Brass finish, New 6" Onyx break, Vintage Column, 1" Ivy Embossed Tubing, and Bridge Arm and Top Break shown in previous picture SOLD
Click on photos for larger view	Large Table Lamp Base, to be Refinished (V) Brass Slips 1/8 IP pipe, stamped with number 8011 underneath, 9-1/2" point to point, 8-1/4" round. SOLD
	Antique Floor Lamp Base, heavy Cast Brass, rounded hexagon embossed design, with new Onyx insert $85 (Without Onyx $65). SOLD
Click on photos for larger view	Victorian Style Table Lamp Bases (V) Top: 9-1/2" corner to corner, 4" inset, stamped #3001, slips 1/8 IP pipe. SOLD Left: Copper-plated brass, stamped #67 on foot, heavy, 5-1/2" rounded square, slips 1/8 IP pipe. SOLD Right: 8" corner-to-corner, 3/4" tapped center hole, 5-1/4" rounded square. SOLD
Click on photos for larger view SOLD	Matching PairTable Lamp Bases (V) Brass 5-3/4" bottom diameter, 4-1/2" top seating, heavy, stamped "L&L #7820" slip 1/8 IP pipe. Price: SOLD
	Table Lamp Base with night light hole, Cast Brass (?) or Cast Metal (magnet will not stick). 3" high, 7" spread, 4" insert recessed 1/4" SOLD
	Ornate Table Lamp Base, Antique. (MedCo, Inc. NY 10 NY stamped on bottom). Cast Brass, night light hole, 4-1/8" insert recessed 3/4", 8" bottom, 2-1/4" high. Cord hole. $35
SOLD	Cast Iron bridge arm: Restoration started, but not finished. Has been blasted to remove many coats of paint! 10-1/2" spread, 7" tall. SOLD
Bridge Arms (A) All SOLD Click on photos for larger view
Click on photos for larger view	Bridge Arms (A) Ornate old antiques that need to be refinished. Top: Heavy, Cast Brass, Victorian, 7-1/4" tall, 11-1/2" long, requires Wing Nut Swivel. SOLD Bottom: Pewter, 8-1/2" tall, 13" long. Takes standard swivel. $50
Click on photos for larger view	Silver Base for Table Lamp (V) (a Pair in stock). 8" diameter, with 6" inset for onyx or marble break. Silver from India. One $20, Both $35
	Bird Bridge Arm (A) (R) Cast Iron, 10-1/2" long, 5-5/8" tall, with Wing Nut Swivel. Goes with Light-Weight Bridge Lamp Base shown below. SOLD
Click on photos for larger view	Light-weight Bridge Lamp Base (A) (R) Cast Iron. Matches Bird Bridge Arm shown above. Base stamped "501-B" on bottom, tapped for 1/4 IP pipe. SOLD
Click on photos for larger view SOLD	SOLD Bridge Arm (A) Art Deco, Goes with Base (shown next) Cast Iron. 13-1/2" long, 7-1/2" tall, with Wing Nut Swivel. All original. Sold as a complete lamp only.
Click on photos for larger view SOLD	SOLD Bridge Lamp Base & Pole (A) Art Deco, goes with bridge arm in picture above it. Cast Iron, 11" point to point, 8" side to side, Hollow Twist Pole for cord to go inside, stamped on bottom "SJ". Total height of lamp 59". All original. Only needs to be cleaned and re-wired. Sold as complete lamp only,
Above: This is what it looked like before. Below: These pictures were taken after it was refinished. Click on photos for larger view	Square Floor Lamp Base (A) SOLD Stamped on bottom "KMC 197", Brass Plated Iron 9-1/4" square (measuring from outside feet, 10-1/4" square). Very ornate, with inset for flat marble or onyx break, tapped for 1/4 IP pipe. After restoration: Here's what it looks like with 5" Onyx insert